This Phuket pool project required the old tiled finish to be removed before the surface could be prepared for retiling and regrouting. Removing failed material properly is an important part of a durable renovation because new tiles should not be installed over a loose or unstable base.
Project focus: drain the pool, remove the old tiles and scratch coat, prepare the surface, install the new finish, grout the joints and allow the materials to cure before refilling.
Why old pool tiles need to be removed
A few damaged tiles can sometimes be repaired locally. Wider problems such as loose tiles, hollow areas, crumbling grout or a failing surface may require more extensive removal. The condition below the visible tiles matters because the new finish relies on a clean, stable and properly prepared base.
Before deciding on the repair scope, the pool should be inspected for damaged grout, movement, water loss and areas where tiles no longer bond correctly. This helps distinguish a focused repair from a complete pool retiling project.
How this retiling process is completed
The pool is first drained completely so the tiled surface can be inspected and accessed safely. Ladders, drain plates and other attached fittings are removed where required. The old tiles are then taken off using suitable hand or pneumatic tools, followed by removal of the old scratch coat where it is no longer suitable for the new installation.
Once the failed material has been removed, the exposed surface is cleaned and prepared. A new coating or preparation layer is applied and allowed to dry. On this type of project, that stage may require up to two days before the next work begins.
After the new tiles are installed, grout is worked into the joints and the surface is cleaned. The grout then needs adequate curing time before the pool is refilled. Rushing the drying stages can undermine otherwise careful preparation and installation.
Planning a pool retile in Phuket
The practical scope depends on the size and shape of the pool, the selected tile, the condition of the existing surface, access around the property and the amount of preparation required. These factors affect the work schedule and should be confirmed before materials are ordered or the pool is taken out of service.
Villa owners and property managers should also plan for draining, curing and refilling time. A clear sequence helps protect the new finish and reduces disruption to residents or guests.
Repair, regrout or completely retile?
The correct choice depends on how widespread the failure is. If tiles remain secure and the main issue is worn grout, complete regrouting may be sufficient. Where tiles or the underlying preparation have failed across larger areas, retiling provides an opportunity to rebuild the finish correctly.
See our pool renovation, retiling and regrouting service in Phuket for the inspection process, finish options and related projects.
Arrange a pool surface inspection
Contact Total Pool Solutions if your pool has loose tiles, hollow areas, damaged grout or an ageing finish. We can inspect the surface and explain whether local repair, regrouting or complete retiling is the appropriate next step.