OCT/2025 – Deep cleaning in preparation for re-grout. This is one of the MOST IMPORTANT parts of the job. It is essential to work with clean, dirt free surfaces for a long-lasting finish. This is our specialty.
October 2025 – This Phuket swimming pool required surface repair and renewed grout. Cracks in concrete or plaster pools and deteriorated tile joints should be assessed together because both can affect the condition, appearance and service life of the pool finish.
Pool finish before the repair and regrouting work
Assessing Cracks and Worn Pool Grout
Visible cracking does not always reveal the full extent or cause of a problem. Before starting, the pool surface and tile joints should be inspected for loose material, failed grout and areas that may require a more detailed repair. Repeated cracking or unexplained water loss can indicate that further investigation is needed rather than a simple cosmetic patch.
The correct scope depends on what the inspection finds. Some pools need focused crack repairs and regrouting, while widespread tile failure may justify a broader pool retiling and regrouting programme.
Preparing and Repairing the Pool Surface
Concrete or plaster pool repairs commonly require the water level to be lowered or the pool to be drained so the damaged area can be accessed. Loose or unsound material must be removed before an appropriate repair compound is applied. Sealing and curing are important parts of the process; refilling too early can compromise the repair.
Inspect cracks, loose material and surrounding tile joints.
Expose and clean the affected repair areas.
Apply suitable repair and sealing materials.
Allow the repaired surface to cure correctly.
Check the finish before returning the pool to service.
Removing and Replacing Degraded Grout
Regrouting involves removing old, eroded or poorly bonded grout from the tile joints. The joints are then cleaned and prepared before new pool-grade grout is installed. This restores a more consistent finish and closes worn joints that can collect dirt or continue to deteriorate.
Grout discoloration alone may be a maintenance issue, but erosion, missing sections and widespread cracking deserve professional attention. Addressing the surface repair and grout condition as one project helps avoid finishing over defects that still need work.
A Renewed and Easier-to-Maintain Finish
The finished project renewed the tile joints and improved the overall pool surface. For villas, managed properties and private homes in Phuket, a properly planned repair can reduce disruption and provide a clearer basis for future maintenance.
Total Pool Solutions can also assess connected defects through its pool repair and installation services. The recommendation will be based on the visible condition and any testing required, rather than replacing sound areas unnecessarily.
Arrange a Pool Surface Inspection in Phuket
If your pool has cracks, missing grout, loose tiles or recurring surface damage, arrange an inspection before the affected area grows. We will explain whether focused repair, complete regrouting or a wider renovation is appropriate.
Oct/2025 – Total Pool Solutions uses swimming pool tiles that are specially designed to withstand constant submersion, UV exposure, and harsh chemicals. Unlike regular tiles, pool tiles are non-porous and highly durable – glass and porcelain are top choices for longevity and aesthetics. They’re used for waterline accents or full interior coverage, enhancing both style and functionality while resisting fading, cracking, and water damage.
Proper grouting ensures durability and enhances the pool’s appearance.
Sept/2025 – Rain doesn’t stop play for Total Pool Solutions. Prep work underway for the re-grout of this resort’s swimming pool.
The resort owner had the job done only 3 years ago, but the grout had since vanished. As always – the cheaper jobs turn out to be the most expensive. This time quality pool grout was used, the existing tiles were polished to give them a brand new look, and all in all, the final product, as always, looks amazing !!
Sept/2025 – 1 year after a full re-grout and the pool still looks like the work was completed yesterday !
As a rule, Total Pool Solutions conducts annual inspections on all swimming pool work, checking condition, and for any signs of deterioration, of which there is always none. It’s a satisfying task.
Sept/2025 – A total swimming pool renovation by Total Pool Solutions. In this case, we repaired multiple leaks, replacing coping (edge), and retiled the terrace.
Sept/2025 – Swimming pool construction pipework is a critical component of the overall system, responsible for circulating water through the filtration, heating, and disinfection equipment.
Suction lines, typically 1.5 to 2 inches in diameter, connect the skimmer and main drain to the pump, while the return line carries filtered water back to the pool through wall inlets. Proper installation, including the use of appropriate fittings, ensuring correct pipe diameter to minimize resistance, and pressure testing before backfilling, is essential for a leak-free and efficient system.
Sept/2025 – Building a new pool terrace is an exciting project that transforms outdoor space into a private oasis. The first step is a thorough assessment of the site’s structural feasibility. Total Pool Solutions can facilitate the entire process.
August 2025 – This Phuket swimming pool had a leaking overflow gutter that was contributing to an unusually high water bill. Continued leakage around an overflow system can also expose the surrounding pool structure and finishes to unnecessary moisture. Total Pool Solutions stripped back the affected surfaces, resealed the gutter and repainted the repaired area.
Overflow gutter before the surface repair and waterproofing work
Why an Overflow Gutter Leak Matters
An overflow gutter collects water displaced from the pool and directs it toward the balance tank and circulation system. When the gutter surface, joints or connected components allow water to escape, the pool may need frequent topping up. The result can be higher water use, unstable pool chemistry and moisture around areas that should remain protected.
Unexplained water loss should be investigated before assuming the gutter is the only source. A professional pool leak detection inspection can help distinguish gutter leakage from pipework, balance-tank or pool-shell problems.
Preparing the Gutter for Waterproofing
Waterproofing materials perform best when they are applied to a clean, stable and properly prepared base. Coating over loose paint, contamination or unsound material can hide the defect temporarily without providing a durable repair. For this project, the existing surfaces were stripped back before the gutter was resealed.
Expose the affected gutter surfaces.
Remove loose or failed surface material.
Clean and prepare the repair area.
Reseal the gutter with suitable waterproofing materials.
Repaint and allow the finish to cure before normal operation.
Resealing and Repainting the Overflow Area
After preparation, the gutter was resealed to restore a protected surface. The repaired area was then repainted to provide a consistent finish. Correct curing time is important before the overflow system is returned to continuous contact with pool water.
Where damaged gutter finishes are part of wider tile, grout or pool-surface deterioration, the work can be coordinated with a broader pool retiling and regrouting assessment. This avoids completing one finish while leaving connected defects untreated.
Maintaining a Pool Overflow Gutter
Regular cleaning helps prevent debris and standing contamination from degrading the gutter finish. Property owners and maintenance teams should also watch for falling water levels, damp areas, staining, cracked coatings or a sudden increase in water use. Early investigation usually provides more repair options than waiting for the affected area to spread.
Arrange an Overflow Gutter Inspection in Phuket
If your pool is losing water or the overflow gutter coating is cracked, lifting or deteriorated, arrange an inspection. Total Pool Solutions can assess the visible condition, identify whether additional leak testing is required and recommend an appropriate repair scope.